250ml Solid Surface & Quartz Surface Adhesive Popular Selling
Products description
250ml Solid Surface Adhesive For Pure Acrylic,Composites Sheet
Spec.: 250ml.
Applicable materials: Pure Acrylic Board, composite acrylic board and unsaturated polyester board.
Applicable color: differentiation coloring.
Coating length: 9m.
Cartridge Material: PBT.
Products advantage: High effective, time-saving, professional, stable and environmental.
Disadvantage: Higher cost
The main advantages of our adhesives are as follows:
⢠100% Reactive
⢠Translucent
⢠Color Matched
⢠Fast Room Temperature Curing
⢠U.V. Stable
⢠Phthalate Free
⢠Non Yellowing
⢠Impact Resistant
⢠Wear Resistant
⢠Stain Resistant
⢠Water Penetration Resistant
Specially features:
Shelf Time: If you use our PBT cartridge packing, shelf time can be at least 12 month.
Curing Time: Our curing time is very stable, within 12 months, curing time will be the same. It is around 20min at 21°C.
Bending Strength: After joint, The bending strength can reach 35.5Mpa, which is better than Corian, and the same with Staron, LG.
Yellowing: Our white glue will no yellowing for more than 10 years after joint with the solid surface, no yellowing.
Directions
1. Please read the directions on the outer package of the products carefully before use.
2. Remove the cover and unplug, clean up the blockage if there is any. Please make sure that glue A and glue B flow out at the same time before you put the mixer. Only after the mixer is put and fixed to the glue gun, can you begin to apply the glue. In order to ensure the good quality of the glue, please note: Do discard some glue in the quantity of the similar length to the mixer when change a new mixer and make sure to accomplish gluing within hardening period (8 minutes).
3. Please change a new mixer when the pausing time is more than 8 minutes during the gluing.
4. Wear protective glasses, mask and gloves while using glue to avoid inhaling vapor. Please operate in ventilation area.
5. In case that the working temperature is 10°Cbelow, you can adopt the regional heating method (but the temperature should not be above 30°C ). For example, use the coal to heating in the factory, or use the electric fan or sunlamp to heating at site (Should not be too near to the glue. The electric fan should be 1m far way while the sunlamp should be 3m far way at least).
6. For other information, please refer to the products manual and security documents (or refer to the operation directionsâattached, or ask the manufacturer for video images).Cautions
The seamless glue for artificial stone is the flammable chemical. Please avoid contact with the skin directly. In case of contact with the eyes, please immediately wash with large amount of clean water for 15 minutes. Wash thoroughly with soap and water after skin contacting. If inhaled, move the suffered one to a place with fresh air , in case swallowed, induce vomiting, and call a physician immediately.
250ml Solid Surface Adhesive For Pure Acrylic,Composites Sheet
Spec.: 250ml.
Applicable materials: Pure Acrylic Board, composite acrylic board and unsaturated polyester board.
Applicable color: differentiation coloring.
Coating length: 9m.
Cartridge Material: PBT.
Products advantage: High effective, time-saving, professional, stable and environmental.
Disadvantage: Higher cost
The main advantages of our adhesives are as follows:
⢠100% Reactive
⢠Translucent
⢠Color Matched
⢠Fast Room Temperature Curing
⢠U.V. Stable
⢠Phthalate Free
⢠Non Yellowing
⢠Impact Resistant
⢠Wear Resistant
⢠Stain Resistant
⢠Water Penetration Resistant
Specially features:
Shelf Time: If you use our PBT cartridge packing, shelf time can be at least 12 month.
Curing Time: Our curing time is very stable, within 12 months, curing time will be the same. It is around 20min at 21°C.
Bending Strength: After joint, The bending strength can reach 35.5Mpa, which is better than Corian, and the same with Staron, LG.
Yellowing: Our white glue will no yellowing for more than 10 years after joint with the solid surface, no yellowing.
Directions
1. Please read the directions on the outer package of the products carefully before use.
2. Remove the cover and unplug, clean up the blockage if there is any. Please make sure that glue A and glue B flow out at the same time before you put the mixer. Only after the mixer is put and fixed to the glue gun, can you begin to apply the glue. In order to ensure the good quality of the glue, please note: Do discard some glue in the quantity of the similar length to the mixer when change a new mixer and make sure to accomplish gluing within hardening period (8 minutes).
3. Please change a new mixer when the pausing time is more than 8 minutes during the gluing.
4. Wear protective glasses, mask and gloves while using glue to avoid inhaling vapor. Please operate in ventilation area.
5. In case that the working temperature is 10°Cbelow, you can adopt the regional heating method (but the temperature should not be above 30°C ). For example, use the coal to heating in the factory, or use the electric fan or sunlamp to heating at site (Should not be too near to the glue. The electric fan should be 1m far way while the sunlamp should be 3m far way at least).
6. For other information, please refer to the products manual and security documents (or refer to the operation directionsâattached, or ask the manufacturer for video images).Cautions
The seamless glue for artificial stone is the flammable chemical. Please avoid contact with the skin directly. In case of contact with the eyes, please immediately wash with large amount of clean water for 15 minutes. Wash thoroughly with soap and water after skin contacting. If inhaled, move the suffered one to a place with fresh air , in case swallowed, induce vomiting, and call a physician immediately.
unlisted
Contact supplier
